STS Radiagem DP6 Smartprobe
Simulated Smart Contamination Probe
Simulated contamination probe for Mirion Radiagem 2000
The STS Radiagem Simulation Probe consist of a simulated probe housing STS electronics and cable connector so that it will operate with a real Mirion Radiagem 2000 meter. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by a skilled operator. Too fast, or too far away results in no detection – excellent training!
The Smart Probes uniquely turn themselves on when the instrument is switched on.
Cross contamination can easily be demonstrated to Nuclear industry trainees, as can decontamination – both benefits of using a “real” contamination, even if not radioactive.
The contamination lasts at room temperature for 1-2 hours but totally evaporates within 24hrs leaving the training area ready for the next exercise.
STS manufacture a wide range of simulators for many manufacturers products. We are happy to consider your specific requirements.