Contamination Probes
STS Contamination Probes Simulated Contamination Probes For Use With STS Simulated Meters
STS manufacture a range of standard probes that can be used with any STS simulated Meter. All the probes use the same technology with some of the large area probes having dual detectors to increase the sensitive measurement area. These probes are all powered from the host meter and connected via the STS 5 pin cable unique to this product range. The connector means its impossible to connect a real probe to the simulated meter, or to connect a simulated probe to a real meter.
-
Probes within the STS Range
• AP3
• BP4
• DP2
• DP6
• EP15
• FHZ732
• HP210
• HP260
• 44A
• 43-5 -
STS Probes Uses
• AP3 & BP4 – Used with older style meters.
• DP2 – (AP2) Square probe – usually used with STS Thermo Electra.
• DP6 – Large area Probe (or BP19) usually used with STS Thermo Electra – this probe is available with either a single or dual detector.
• EP15 & 44A – Usually used with the STS Thermo mini 900 monitor.
• FHZ732 – Pancake probe for STS FH40G Dual simulated meters, can also be supplied for other meters with a different connector.
• HP210 – Shielded Probe – usually used with STS Ludlum Model 3/12.
• HP260 – Pancake style probe – usually used with the STS Thermo Electra or the STS Ludlum Model 3/12/14.
• 43-5 – Large area probe – usually used with STS Ludlum Model 3/12/14 - Documentation
